450w 480w 500w 550w Sun Power Mono Half Cell Solar Panel Price
1. Description
For users, there is not much difference between monocrystalline and
multicystalline cells, both of which have good life and
stability.Although the average conversion efficiency of
monocrystalline silicon cell is about 1% higher than that of
polysilicon, but because monocrystalline silicon cell can only be
made into quasi-square (four sides are arc-shaped), there will be
part of the area cannot be filled up when composing solar
panels.Polysilicon is a square, so there is no such a problem.
Their advantages and disadvantages are as follows:
Silicon component: The power of a single component is relatively
high.Under the same floor area, the installed capacity is higher
than the film module.However, the components are heavy and fragile,
with poor high-temperature performance, poor weak light performance
and high annual attenuation rate.
Thin film component: The power of a single component is slightly
lower.But the power generation performance is high, high
temperature performance is good, low light performance, shadow
occlusion power loss is small, low annual attenuation rate.Wide
application environment, beautiful, environmental protection.
2. Parameter Datas
High Efficiency Solar Panel 530W Single Crystal Solar Panel
Photovoltaic Panel
| Product Name | Mono Solar Panels |
| Panel Size | 1997x992x35 mm |
| Cells | 144(6*24) |
| Weight | 22 kg |
| Surface | |
| Coated tempered glass |
| Packing | 66 pcs/pallet |
| Loading in 40'FCL | 726 pcs |
| STC Parameter |
| Max Out Put(Pmax/W) | 370 | 375 | 380 | 385 | 390 |
| VOC(V) | 48.35 | 48.75 | 49.06 | 49.35 | 49.65 |
| ISC(A) | 9.79 | 9.86 | 9.93 | 10 | 10.07 |
| Vmp(V) | 39.88 | 40.11 | 40.34 | 40.57 | 40.8 |
| Imp(A) | 9.28 | 9.35 | 9.42 | 9.49 | 9.56 |
| conversion efficiency(%) | 18.36 | 18.93 | 19.18 | 19.43 | 19.69 |
| Work Temperature | -40℃-85℃ | | | | |
| Max system voltage | 1000/1500V |
3. Advantages
High component conversion efficiency, advanced manufacturing
technology
Five main grid line solar cells are used to reduce power loss
The hidden crack and other invisible microscopic crack defects of
solar cells are strictly controlled
Adopt advanced low reflection high transmittance glass and advanced
battery technology, in the evening, cloudy, cloudy and other low
light environment can also play a good performance.
Factory Direct High Efficiency All Black Solar Panel
Monocrystalline 400W Mono Solar Panels Cell : A grade solar cells
A Wide Range of Products:Mono-crystalline solar panel and poly(multi)-crystalline solar
panel(depending on configurations)
High Reliability:Guaranteed mechanical resistance to severe weather conditions for
reliable power output.Compliant with IEC 61215 and
IEC61730.Certified by TUV,CE,ISO and etc.
Tight Tolerance:Guaranteed positive tol erance from 0-3% ebsures power ♦output
reliability.
Traceability:We provide flash report and embedded bar code ID for each module
for complete traceability
A Wide Range of Applications: Independent systems(household,powder supplies for remote areas,
remote systems, ete.)and grid-connected photovoltaic power
stations(residential,commercial, industrial power supply systems)
Warranty:10-year limited product warranty and 25-year limited power
guarantee
4. Application
Monocrystalline Silicon Solar Panel Photovotaic Power Generation
Module Household Street Lamp
Solar panels can be used for a wide variety of applications
including remote power systems for cabins, telecommunications
equipment, remote sensing, and of course for the production of
electricity by residential and commercial solar electric systems.
Use solar energy to power your home and reduce your dependence on
the grid
5. Package
PACKAGING SPE CIFIC ATIONS
| Number of modules per pallet | 30 |
| Number of pallets per 40’ container | 22 |
Packaging box dimensions (L / W / H) | 2135mm / 1110mm / 1190mm |
| Box weight | 745 kg |
6. Principles
A solar cell is a device that responds to light and can convert
light energy into electricity. There are many kinds of materials
that can produce photovoltaic effect, such as: single crystal
silicon, polycrystalline silicon, amorphous silicon, gallium
arsenide, indium copper selenide and so on. Their power generation
principles are basically the same, and now take crystalline silicon
as an example to describe the process of photovoltaic power
generation. P-type crystalline silicon can be doped with phosphorus
to obtain N-type silicon, forming a P-N junction.
